Product features
Xcm series sports PLC, including 60 point specification.
It has complete functions and has all the functions of xc3 series, which can meet various use needs of users
Power specification: AC220V (- E)
Input type: NPN type
Output type: Transistor (T)
Support high-speed counting (up to 80kHz), 10 channel high-speed pulse output (up to 100kHz), communication and other special functions
Standard RS232 port for programming and downloading
RS485 port is provided as standard, which is used for various communication
The external expansion module is not supported, but the external expansion BD board can be connected
Model List
model | Input points （DC24V） | Output points （R，T） |
AC power supply | DC power supply |
| Relay output | Transistor output | Transistor relay hybrid output | Relay output | Transistor output | Transistor relay hybrid output |
NPN type | - | XCM-60T-E | - | - | - | - | 36 points | 24 points |
Function configuration table
○ user selection × Not supported √ supported
Series and points | Clock | signal communication | Expansion module | BD board | Number of high-speed counting channels | Number of pulse output channels (T type / RT type) | External interrupt |
485 communication | Free communication | Incremental mode | Pulse + direction | AB phase |
Xcm series |
XCM-60 | ○ | √ | √ | × | √ | 4 | 0 | 3 | 10※1 | 4 |
※1：After using BD board, Y1 cannot be used for pulse output.
Basic specifications
project | Specifications |
Insulation voltage | DC500V 2MΩabove |
Anti noise | Noise voltage 1000vp-p 1US pulse for 1 minute |
Air | No corrosive and combustible gas |
Ambient temperature | 0℃~60℃ |
Ambient humidity | 5%~95%（No condensation） |
Communication port 1 | RS-232，Connect upper computer, man-machine interface programming or debugging |
Communication port 2 | RS-232/RS-485，Networking or connecting intelligent instruments, frequency converters, etc |
Communication port 3 | BD board expansion communication portRS-232C/RS-485 |
Install | It can be fixed with M3 screws or directly installed on the din46277 guide rail with a width of 35mm |
Grounding | The third kind of grounding (not common grounding with strong current system) |
Performance specifications
Project | Specifications |
Program execution mode | Cyclic scanning mode |
Programming mode | Instruction and ladder diagram |
processing speed | 0.5us |
Outage hold | Using flashrom and lithium battery |
User program capacity ※ 1 | 160KB |
I/Opoint※2 | Total points | 60point |
Input points | 36point X0~X43 |
Output points | 24point Y0~Y27 |
Internal coil（X）※3 | 544point：X0~X1037 |
Internal coil（Y）※4 | 544point：Y0~Y1037 |
Internal coil（M） | 8768point | M0~M2999 【M3000~M7999】※5 |
Special use※6 M8000~M8767 |
technological process（S） | 1024point | S0~S511 【S512~S1023】 |
timer（T） | point | 640point | T0~T99：100msNot cumulative |
T100~T199：100ms cumulative |
T200~T299：10ms Not cumulative |
T300~T399：10ms cumulative |
T400~T499：1ms Not cumulative |
T500~T599：1ms cumulative |
T600~T639：1ms Precise timing |
Specifications | 100mS Timer: setting time0.1~3276.7秒 10mS Timer: setting time0.01~327.67秒 1mS Timer: setting time0.001~32.767秒 |
Counter（C） | point | 640points | C0~C299：16 bit sequence counter |
C300~C598：32-bit forward / backward counter |
C600~C618：Single phase high speed counter |
C620~C628：Dual phase high speed counter |
C630~C638：AB Phase high speed counter |
Specifications | 16 bit counter: set value K0~32,767 32-bit counter: set value-2147483648~＋2147483647 |
Data register（D） | 5024 words | D0~D2999 【D4000~D4999】※5 |
Special use※6 D8000~D9023 |
Flashrom register（FD） | 1980 words | FD0~FD1519 |
Special use※6 FD8000~FD8349 |
Special use※6 FD8890~FD8999 |
Extended internal register（ED）※7 | 36864 words | ED0~ED36863 |
Security register（FS）※12 | 16 words | FS0~FS15 |
High speed processing function | High speed counting, pulse output, external interrupt |
Password protection | 6-bit length ASCII |
Self diagnosis function | Power on self-test, monitoring timer, syntax check |
remarks:
※ 1: user program capacity refers to the maximum program capacity during confidential download.
※ 2: I / O points refers to the number of terminals that users can access and output signals from the outside.
※ 3: X refers to the internal input relay, and X exceeding I points can be used as intermediate relay.
※ 4: y refers to the internal output relay. Y exceeding O points can be used as an intermediate relay.
※ 5: [] mark, which is the default power-off holding area and can be changed. For the modified address, please refer to appendix 1-4 of the manual of basic instructions.
※ 6: special use refers to the special purpose register occupied by the system, which cannot be used for other purposes. For details, please refer to Appendix 1 of the basic instruction manual.
※ 7: only the hardware version is in v3 Only basic units of 0 and above have internal expansion register ed.
※ 8: the numbers of input coils and output relays / transistors are octal numbers, and the numbers of other memories are decimal numbers.
※ 9: I / O without actual connection with peripheral equipment can be used as fast internal relay.
※ 10: flashrom register does not need to be set with power failure hold, and its data will not be lost in case of power failure (without battery).
※11：V3. In 3K and later programming software, FS register is newly added to occupy part of the original FD register, so v3 The FD register in 3K and later programming software will be reduced.
Appearance dimension drawing (unit: mm)
